Vacancies
Vacancies > Job Vacancy Announcement Detail
Job Vacancy Announcement Detail
Employer: | Konstruct Corporation |
DBA: | Konstruct Corporation |
Address: | P.O. Box 505656 Saipan, Northern Mariana Islands 96950 United States |
Phone: | 670-235-3027 |
Other Number: | |
Contact Konstruct Corporation via email |
Job Vacancy Announcement | JVA |
JVA Type: | New |
Island | Saipan |
FLSA Covered? | Yes, covered |
DOD related? | No |
PERM related? * | No |
VEVRAA related? | No |
Original Number of Openings: | 3 |
Number of Openings Currently Available | 3 |
Specific Worksite location: | Saipan |
Job Classification: | Construction and Extraction Occupations |
Job Title: | Mason |
Announcement Number: | 16-08-41302 |
Job Classification: | Construction and Extraction Occupations |
Opening Date: | 8/24/2016 |
Closing Date: | 9/8/2016 |
Salary Range: | $6.55 to $7.05 / Hourly |
Job Title: | Mason |
Job Duties: | DUTIES AND RESPONSIBILITIES : 1. Set the forms that hold concrete to the desired pitch and depth, and align them. 2. Check the forms that hold the concrete to see that they are properly constructed. 3. Spread, level, and smooth concrete, using rake, shovel, hand or power trowel, hand or power screed, and float. 4. Monitor how the wind, heat, or cold affect the curing of the concrete throughout the entire process. 5. Direct the casting of the concrete and supervise laborers who use shovels or special tools to spread it. 6. Produce rough concrete surface, using broom. 7. Mold expansion joints and edges, using edging tools, jointers, and straightedge. 8. Clean chipped area, using wire brush, and feel and observe surface to determine if it is rough or uneven. 9. Signal truck driver to position truck to facilitate pouring concrete, and move chute to direct concrete on forms. 10. Apply hardening and sealing compounds to cure surface of concrete, and waterproof or restore surface. 11. Operate power vibrator to compact concrete. 12. Chip, scrape, and grind high spots, ridges, and rough projections to finish concrete, using pneumatic chisels, power grinders, or hand tools. 13. Cut out damaged areas, drill holes for reinforcing rods, and position reinforcing rods to repair concrete, using power saw and drill. 14. Waterproof or restore concrete surfaces, using appropriate compounds. 15. Wet concrete surface, and rub with stone to smooth surface and obtain specified finish. 16. Wet surface to prepare for bonding, fill holes and cracks with grout or slurry, and smooth, using trowel. 17. Fabricate concrete beams, columns, and panels. 18. Install anchor bolts, steel plates, door sills and other fixtures in freshly poured concrete or pattern or stamp the surface to provide a decorative finish. 19. Build wooden molds, and clamp molds around area to be repaired, using hand tools. 20. Cut metal division strips, and press them into terrazzo base so that top edges form desired design or pattern. 21. Push roller over surface to embed chips in surface. 22. Polish surface, using polishing or surfacing machine. |
High School Diploma Required? | Undetermined |
Qualification Requirements: | Applicants must at least be a holder of high school diploma. Applicants must have a minimum of a few months to one year experience. |
Full or Part Time: | Full Time |
Hours per Week: | 40 |
Hours per Day: | 8 |
Payment Frequency: | Bi-weekly |
Overtime Available: | Yes |
Overtime Rate: | $9.825 - $10.575 |
Rate x 1.5 per hour Exempted: | No |
Specify All Payroll Deductions: | CNMI and Federal Income Taxes as applicable. |
Required tools, supplies and Equipment to be provided: | Braces — Form braces Brooms — Concrete finishing brushes Cement bulk material equipment — Concrete chutes; Elephant trunks; Transit mix deflectors Cement pumping units — Concrete pumps Cement retainers — Form liners; Form tubes; Steel forms; Wooden forms Cold chisels — Brick splitters Concrete mixers or plants — Concrete mixers Concrete spreaders — Double-beam screeders; Roller tube finishers; Walk-behind laser screeds; Wet screeds Concrete vibrators — Internal concrete vibrators; Surface concrete vibrators Curbing machines — Slipform curbing pavers; Slipforming machines Curing machines — Cure sprayers See more occupations related to this tool. Demolition hammers |
Anticipated starting date of employment: | 11/15/2016 |
Anticipated closing date of employment: | 11/14/2017 |
Housing Provided: | No |
Food Provided: | No |
Transportation required: | Yes |
If transportation is required, daily transportation to and from the worksite(s) will be provided to the workers. Daily pick-up place(s) will be at: | Beach Road corner Afetna St. San Antonio |
Fringe Benefits: | None |
Comments: | Interested applicants may apply in person at Konstruct Office, Beach Rd. corner Afetna St. San Antonio Monday to Friday from 8:00 am to 5:00 pm no later than September 9, 2016. Completed Employment Applications must include Employment Certifications and any other documents that would support your eligibility to work. Incomplete applications will not be considered. The company has a Drug-Free Workplace Policy in effect and requires successful candidate to a pre-employment Drug Testing. |