Vacancies > Job Vacancy Announcement Detail

Job Vacancy Announcement Detail

Address: PMB 455 P.O. Box 10003, As Terlaje Lower San Vicente
Saipan, Northern Mariana Islands
96950 Northern Mariana Islands
Phone: 670-234-3358

Job Vacancy Announcement JVA
JVA Type: Renewal
Island Saipan
FLSA Covered? No, not covered
DOD related? No
PERM related? * No
VEVRAA related? No
Original Number of Openings: 2
Number of Openings Currently Available 2
Specific Worksite location: SAIPAN
Job Classification: Installation, Maintenance, and Repair Occupations
Announcement Number: 19-09-80342
Job Classification: Installation, Maintenance, and Repair Occupations
Opening Date: 9/15/2019
Closing Date: 10/6/2019
Salary Range: $12.54 to $12.54 / Hourly
Job Duties: File, grind, sand, and smooth filled or repaired surfaces, using power tools and hand tools. Inspect repaired vehicles for proper functioning, completion of work, dimensional accuracy, and overall appearance of paint job, and test-drive vehicles to ensure proper alignment and handling. Fit and weld replacement parts into place, using wrenches and welding equipment, and grind down welds to smooth them, using power grinders and other tools. Prime and paint repaired surfaces, using paint sprayguns and motorized sanders. Follow supervisors' instructions as to which parts to restore or replace and how much time the job should take. Sand body areas to be painted and cover bumpers, windows, and trim with masking tape or paper to protect them from the paint. Chain or clamp frames and sections to alignment machines that use hydraulic pressure to align damaged components. Position dolly blocks against surfaces of dented areas and beat opposite surfaces to remove dents, using hammers. Cut and tape plastic separating film to outside repair areas to avoid damaging surrounding surfaces during repair procedure and remove tape and wash surfaces after repairs are complete. Review damage reports, prepare or review repair cost estimates, and plan work to be performed. Fill small dents that cannot be worked out with plastic or solder. Remove damaged sections of vehicles using metal-cutting guns, air grinders and wrenches, and install replacement parts using wrenches or welding equipment. Remove small pits and dimples in body metal, using pick hammers and punches. Remove upholstery, accessories, electrical window-and-seat-operating equipment, and trim to gain access to vehicle bodies and fenders. Mix polyester resins and hardeners to be used in restoring damaged areas. Fit and secure windows, vinyl roofs, and metal trim to vehicle bodies, using caulking guns, adhesive brushes, and mallets. Adjust or align headlights, wheels, and brake systems. Replace damaged glass on vehicles. Remove damaged panels, and identify the family and properties of the plastic used on a vehicle. Apply heat to plastic panels, using hot-air welding guns or immersion in hot water, and press the softened panels back into shape by hand. Clean work areas, using air hoses, to remove damaged material and discarded fiberglass strips used in repair procedures. Soak fiberglass matting in resin mixtures and apply layers of matting over repair areas to specified thicknesses. Read specifications or confer with customers to determine the desired custom modifications for altering the appearance of vehicles. Cut openings in vehicle bodies for the installation of customized windows, using templates and power shears or chisels. Measure and mark vinyl material and cut material to size for roof installation, using rules, straightedges, and hand shears.
High School Diploma Required? Undetermined
Qualification Requirements: Require a High school diploma or equivalent. Previous work-related skill, knowledge, or experience is usually needed. Knowledge of machines and tools, including their designs, uses, repair, and maintenance. Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
Full or Part Time: Full Time
Hours per Week: 40
Hours per Day: 8
Payment Frequency: Bi-weekly
Overtime Available: Yes
Overtime Rate: $18.81 - $18.81
Rate x 1.5 per hour Exempted: No
Specify All Payroll Deductions: Required Federal and CNMI Taxes will be deducted on workers paycheck.
Required tools, supplies and Equipment to be provided: Workers will be provided without charge or deposit charge all tools, supplies and equipment required to performed the duties assigned.
Anticipated starting date of employment: 10/1/2019
Anticipated closing date of employment: 9/30/2020
Housing Provided: No
Food Provided: No
Transportation required: No
If transportation is required, daily transportation to and from the worksite(s) will be provided to the workers. Daily pick-up place(s) will be at: N/A
Fringe Benefits: NONE
Comments: Pikasso Incorporation have (2) job vacancy announcement for the positon of: AUTO BODY TECHNICIAN. Required date of employment is a temporary-full time position and will start on Oct. 01, 2019 to Sep. 30, 2020. TERMS & CONDITIONS of employment-Workers will be paid no less than $12.08 per hour with an overtime paid at a rate of x1.5 base on hourly rate. Work schedule is from 8:00AM to 5:00PM OR flexible time from Monday to Saturday. The employer will use a single workweek as standard for computation of wage due. Workers will receive and be paid by check on bi-weekly basis with payroll deductions required by federal and CNMI law. THREE-FOURTH GUARANTEE: Workers will be offered employment for a total number of work hours equal to at least three fourths of the workdays of the total period that begins with the first workday after the arrival of the worker at the place of employment or the advertised contractual first date of need, whichever is later, and ends on the expiration date specified on the work contract or in its extension, if any. TRANSPORTATION AND SUBSISTENCE: If the worker completes 50 percent of the work contract period, the employer will provide, reimburse, or advance payment for the worker's transportation and subsistence from the place of recruitment to the place of work. Upon completion of the work contract or where the worker is dismissed earlier, the employer will provide or pay for the worker's reasonable cost of return transportation and subsistence back home or to the place the worker originally departed to work, except where the worker will not return due to subsequent employment with another employer or where the employer has appropriately reported a worker's voluntary abandonment of employment. The amount of transportation payment or reimbursement will be equal to the most economical and reasonable common carrier for the distances involved. DAILY TRANSPORTATION: The employer will not provide daily transportation to and from work site. EMPLOYER PROVIDED TOOLS & EQUIPMENT: Workers will be provided without charge or deposit charge on all tools, supplies and equipment required to perform the duties assigned. BOARD, LODGING OR OTHER FACILITIES: The employer will not provide board, lodging or other facilities. ON-THE-JOB-TRAINING: The employer will not provide on-the-job-training. Interested applicants may send their Resume at PIKASSO INCORPORATION, Saipan, MP96950 every Mon.-Fri. 8:00AM-5:00PM telephone# (670)234-3358 OR send to our email