Vacancies
Vacancies > Job Vacancy Announcement Detail
Job Vacancy Announcement Detail
| Employer: | PACIFIC RIM CNMI, LLC |
| DBA: | PACIFIC RIM CNMI, LLC |
| Address: | PMB 583 PPP BOX 10000 SAIPAN, Northern Mariana Islands 96950 United States |
| Phone: | 670-588-7746 |
| Other Number: | 671-747-7167 |
| Contact PACIFIC RIM CNMI, LLC via email | |
| Job Vacancy Announcement | JVA |
| JVA Type: | New |
| Island | Saipan |
| FLSA Covered? | Yes, covered |
| DOD related? | No |
| PERM related? * | No |
| VEVRAA related? | No |
| Original Number of Openings: | 15 |
| Number of Openings Currently Available | 15 |
| Specific Worksite location: | PMB 583 PPP 10000, SUITE 409 MARIANAS BUSINESS PLAZA NAURU LOOP SUSUPE, SAIPAN MP 96950 |
| Job Classification: | Construction and Extraction Occupations |
| Job Title: | CARPENTERS |
| Announcement Number: | 21-11-93034 |
| Job Classification: | Construction and Extraction Occupations |
| Opening Date: | 11/14/2021 |
| Closing Date: | 12/5/2021 |
| Salary Range: | $15.63 to $15.63 / Hourly |
| Job Title: | CARPENTERS |
| Job Duties: | FOLLOW ESTABLISHED SAFETY RULES AND REGULATIONS AND MAINTAIN A SAFE AND CLEAN ENVIRONMENT. STUDY SPECIFICATIONS IN BLUEPRINTS, SKETCHES, OR BUILDING PLANS TO PREPARE PROJECT LAYOUT AND DETERMINE DIMENSIONS AND MATERIALS REQUIRED. MEASURE AND MARK CUTTING LINES ON MATERIALS, USING A RULER, PENCIL, CHALK, AND MARKING GAUGE. SHAPE OR CUT MATERIALS TO SPECIFIED MEASUREMENTS, USING HAND TOOLS, MACHINES, OR POWER SAWS. INSTALL STRUCTURES OR FIXTURES, SUCH AS WINDOWS, FRAMES, FLOORINGS, TRIM, OR HARDWARE, USING CARPENTERS' HAND OR POWER TOOLS. VERIFY TRUENESS OF STRUCTURE, USING PLUMB BOB AND LEVEL. SELECT AND ORDER LUMBER OR OTHER REQUIRED MATERIALS. ARRANGE FOR SUBCONTRACTORS TO DEAL WITH SPECIAL AREAS, SUCH AS HEATING OR ELECTRICAL WIRING WORK. MAINTAIN RECORDS, DOCUMENT ACTIONS, AND PRESENT WRITTEN PROGRESS REPORTS. BUILD OR REPAIR CABINETS, DOORS, FRAMEWORKS, FLOORS, OR OTHER WOODEN FIXTURES USED IN BUILDINGS, USING WOODWORKING MACHINES, CARPENTER'S HAND TOOLS, OR POWER TOOLS. ERECT SCAFFOLDING OR LADDERS FOR ASSEMBLING STRUCTURES ABOVE GROUND LEVEL. ANCHOR AND BRACE FORMS AND OTHER STRUCTURES IN PLACE, USING NAILS, BOLTS, ANCHOR RODS, STEEL CABLES, PLANKS, WEDGES, AND TIMBERS. INSPECT CEILING OR FLOOR TILE, WALL COVERINGS, SIDING, GLASS, OR WOODWORK TO DETECT BROKEN OR DAMAGED STRUCTURES. ASSEMBLE AND FASTEN MATERIALS TO MAKE FRAMEWORKS OR PROPS, USING HAND TOOLS AND WOOD SCREWS, NAILS, DOWEL PINS, OR GLUE. BORE BOLT HOLES IN TIMBER, MASONRY, OR CONCRETE WALLS, USING POWER DRILL. MAINTAIN JOB RECORDS AND SCHEDULE WORK CREW. REMOVE DAMAGED OR DEFECTIVE PARTS OR SECTIONS OF STRUCTURES AND REPAIR OR REPLACE, USING HAND TOOLS. INSTALL ROUGH DOOR AND WINDOW FRAMES, SUBFLOORING, FIXTURES, OR TEMPORARY SUPPORTS IN STRUCTURES UNDERGOING CONSTRUCTION OR REPAIR. FINISH SURFACES OF WOODWORK OR WALLBOARD IN HOUSES OR BUILDINGS, USING PAINT, HAND TOOLS, OR PANELING. EXAMINE STRUCTURAL TIMBERS AND SUPPORTS TO DETECT DECAY, AND REPLACE TIMBERS AS REQUIRED, USING HAND TOOLS, NUTS, AND BOLTS. APPLY SHOCK-ABSORBING, SOUND-DEADENING, OR DECORATIVE PANELING TO CEILINGS OR WALLS. COVER SUBFLOORS WITH BUILDING PAPER TO KEEP OUT MOISTURE AND LAY HARDWOOD, PARQUET, OR WOOD-STRIP-BLOCK FLOORS BY NAILING FLOORS TO SUBFLOOR OR CEMENTING THEM TO MASTIC OR ASPHALT BASE. FILL CRACKS OR OTHER DEFECTS IN PLASTER OR PLASTERBOARD AND SAND PATCH, USING PATCHING PLASTER, TROWEL, AND SANDING TOOL. PERFORM MINOR PLUMBING, WELDING, OR CONCRETE MIXING WORK. PREPARE COST ESTIMATES FOR CLIENTS OR EMPLOYERS. CONSTRUCT FORMS OR CHUTES FOR POURING CONCRETE. WORK WITH OR REMOVE HAZARDOUS MATERIAL. DIG OR DIRECT DIGGING OF POST HOLES AND SET POLES TO SUPPORT STRUCTURES. |
| High School Diploma Required? | Yes |
| Qualification Requirements: | MUST HAVE A GED/HIGHSCHOOL DIPLOMA WITH 1 YEAR WORK EXPERIENCE IN THE SAME OR SIMILAR FIELD. MUST BE ABLE TO SAFELY LIFT UP TO 30-40LBS. HAVE KNOWLEDGE OF CARPENTRY TOOLS. MUST BE ABLE TO READ BLUEPRINTS AND FOLLOW BUILDING PLANS IN ORDER TO MEET THE NEEDS OF THE PROJECT. MUST BE ABLE TO PERFORM IMPORTANT TASKS SUCH AS CONCRETE SETTING, ROOFING, SCAFFOLD ERECTING, ASSEMBLING LADDERS, PAINTING, TILING, PLASTERING, CABINET MAKING, INSTALLING LIGHTS AND FIXTURES, BRICKLAYING, PLUMBING, AND OTHER CARPENTRY WORK. MUST BE ABLE TO WORK ON FLEXIBLE HOURS INCLUDING WEEKENDS, HOLIDAYS AND NIGHT SHIFTS, IF NEEDED. MUST AGREE TO A POST-OFFER, PRE-EMPLOYMENT DRUG SCREENING TEST THE PROSPECTIVE EMPLOYEE OR APPLICANT WILL BE REQUIRED AN EMPLOYMENT DRUG SCREENING TEST WHICH WILL APPLY EQUALLY TO U.S. WORKERS AND CW-1 WORKERS. |
| Full or Part Time: | Full Time |
| Hours per Week: | 40 |
| Hours per Day: | 8 |
| Payment Frequency: | Bi-weekly |
| Overtime Available: | Yes |
| Overtime Rate: | $23.45 - $23.45 |
| Rate x 1.5 per hour Exempted: | No |
| Specify All Payroll Deductions: | CNMI LOCAL TAXES (CHP.2) & SOCIAL SECURITY/MEDICARE TAXES |
| Required tools, supplies and Equipment to be provided: | Workers will be provided, without charge or deposit charge, all tools, supplies, and equipment required to perform the duties assigned. |
| Anticipated starting date of employment: | 11/15/2021 |
| Anticipated closing date of employment: | 9/30/2022 |
| Housing Provided: | No |
| Food Provided: | No |
| Transportation required: | Yes |
| If transportation is required, daily transportation to and from the worksite(s) will be provided to the workers. Daily pick-up place(s) will be at: | SUITE 409 MARIANAS BUSINESS PLAZA NAURU LOOP SUSUPE |
| Fringe Benefits: | Worker's Compensation |
| Comments: | Applicants may apply at www.marianaslabor.net or submit resume to Suite 409 Marianas Business Plaza from Monday to Friday from 9:00am to 5:00pm. |