Vacancies
Vacancies > Job Vacancy Announcement Detail
Job Vacancy Announcement Detail
| Employer: | PIKASSO INCORPORATION |
| DBA: | PIKASSO INCORPORATION |
| Address: | PMB 455 P.O. Box 10003, As Terlaje Lower San Vicente Saipan, Northern Mariana Islands 96950 Northern Mariana Islands |
| Phone: | 670-234-3358 |
| Other Number: | |
| Contact PIKASSO INCORPORATION via email | |
| Job Vacancy Announcement | JVA |
| JVA Type: | Renewal |
| Island | Saipan |
| FLSA Covered? | Yes, covered |
| DOD related? | No |
| PERM related? * | No |
| VEVRAA related? | No |
| Original Number of Openings: | 1 |
| Number of Openings Currently Available | 1 |
| Specific Worksite location: | Saipan |
| Job Classification: | Installation, Maintenance, and Repair Occupations |
| Job Title: | Automotive Body and Related Repairers |
| Announcement Number: | 22-06-96853 |
| Job Classification: | Installation, Maintenance, and Repair Occupations |
| Opening Date: | 6/16/2022 |
| Closing Date: | 7/7/2022 |
| Salary Range: | $9.07 to $9.07 / Hourly |
| Job Title: | Automotive Body and Related Repairers |
| Job Duties: | Follow supervisors’ instructions as to which parts to restore or replace and how much time the job should take. Review damage reports, prepare or review repair cost estimate, and plan work to be performed. Sand body areas to be painted and cover bumpers, windows and trim with masking tape or paper to protect them from the paint. Fit and weld replacement parts into place using wrenches and welding equipment and grind down weld to smooth them using power grinders and other tools. Prime and paint repaired surfaces using paint spray guns and motorized sanders. Remove damaged sections of vehicles using metal cutting guns, air grinders and wrenches and install replacement parts using wrenches or welding equipment. Chain or clamp frames and sections to alignment machines that use hydraulic pressure to align damaged components. Fill small dents that cannot be worked out with plastic or solder. File, grind, sand, and smooth filled or repaired surfaces, using power tools and hand tools. Inspect repaired vehicles for proper functioning, completion of work, dimensional accuracy, and overall appearance of paint job, and test-drive vehicles to ensure proper alignment and handling. Fit and weld replacement parts into place, using wrenches and welding equipment, and grind down welds to smooth them, using power grinders and other tools. Prime and paint repaired surfaces, using paint sprayguns and motorized sanders. Follow supervisors' instructions as to which parts to restore or replace and how much time the job should take. Sand body areas to be painted and cover bumpers, windows, and trim with masking tape or paper to protect them from the paint. Chain or clamp frames and sections to alignment machines that use hydraulic pressure to align damaged components. Position dolly blocks against surfaces of dented areas and beat opposite surfaces to remove dents, using hammers. Cut and tape plastic separating film to outside repair areas to avoid damaging surrounding surfaces during repair procedure and remove tape and wash surfaces after repairs are complete. Review damage reports, prepare or review repair cost estimates, and plan work to be performed. Fill small dents that cannot be worked out with plastic or solder. wrenches or welding equipment. Remove small pits and dimples in body metal, using pick hammers and punches. Remove upholstery, accessories, electrical window-and-seat-operating equipment, and trim to gain access to vehicle bodies and fenders. Mix polyester resins and hardeners to be used in restoring damaged areas. Fit and secure windows, vinyl roofs, and metal trim to vehicle bodies, using caulking guns, adhesive brushes, and mallets. Adjust or align headlights, wheels, and brake systems. Replace damaged glass on vehicles. Remove damaged panels, and identify the family and properties of the plastic used on a vehicle. Apply heat to plastic panels, using hot-air welding guns or immersion in hot water, and press the softened panels back into shape by hand. Clean work areas, using air hoses, to remove damaged material and discarded fiberglass strips used in repair procedures. Soak fiberglass matting in resin mixtures and apply layers of matting over repair areas to specified thicknesses. Read specifications or confer with customers to determine the desired custom modifications for altering the appearance of vehicles. Cut openings in vehicle bodies for the installation of customized windows, using templates and power shears or chisels. Measure and mark vinyl material and cut material to size for roof installation, using rules, straightedges, and hand shears. |
| High School Diploma Required? | Yes |
| Qualification Requirements: | Require a High School diploma or equivalent. Previous work related skill, knowledge or experience of at least 12 months is usually needed. Knowledge of machines and tools, including their designs, uses, repair and maintenance. Knowledge of raw materials, production processes, quality control, costs and other techniques. |
| Full or Part Time: | Full Time |
| Hours per Week: | 40 |
| Hours per Day: | 8 |
| Payment Frequency: | Bi-weekly |
| Overtime Available: | Yes |
| Overtime Rate: | $13.61 - $13.61 |
| Rate x 1.5 per hour Exempted: | No |
| Specify All Payroll Deductions: | Required Federal and CNMI Taxes will be deducted on workers paycheck. |
| Required tools, supplies and Equipment to be provided: | Workers will be provided, without charge or deposit charge, all tools, supplies, and equipment required to perform the duties assigned. |
| Anticipated starting date of employment: | 10/1/2022 |
| Anticipated closing date of employment: | 9/30/2023 |
| Housing Provided: | No |
| Food Provided: | No |
| Transportation required: | No |
| If transportation is required, daily transportation to and from the worksite(s) will be provided to the workers. Daily pick-up place(s) will be at: | N/A |
| Fringe Benefits: | NONE |
| Comments: | Pikasso Incorporation have (1) job vacancy announcement for the positon of: Automotive Body and Related Repairers. Required date of employment is a temporary-full time position and will start on Oct.01,2022 to Sep.30, 2023. TERMS & CONDITIONS of employment-Workers will be paid no less than $9.07 per hour with an overtime paid at a rate of x1.5 base on hourly rate. Work schedule is from 8:00AM to 5:00PM OR flexible time/day from Monday to Friday. The employer will use a single workweek as standard for computation of wage due. Workers will receive and be paid by check on bi-weekly basis with payroll deductions required by federal and CNMI law. THREE-FOURTH GUARANTEE: Workers will be offered employment for a total number of work hours equal to at least three fourths of the workdays of the total period that begins with the first workday after the arrival of the worker at the place of employment or the advertised contractual first date of need, whichever is later, and ends on the expiration date specified on the work contract or in its extension, if any. TRANSPORTATION AND SUBSISTENCE: If the worker completes 50 percent of the work contract period, the employer will provide, reimburse, or advance payment for the worker's transportation and subsistence from the place of recruitment to the place of work. Upon completion of the work contract or where the worker is dismissed earlier, the employer will provide or pay for the worker's reasonable cost of return transportation and subsistence back home or to the place the worker originally departed to work, except where the worker will not return due to subsequent employment with another employer or where the employer has appropriately reported a worker's voluntary abandonment of employment. The amount of transportation payment or reimbursement will be equal to the most economical and reasonable common carrier for the distances involved. DAILY TRANSPORTATION: The employer will not provide daily transportation to and from work site. EMPLOYER PROVIDED TOOLS & EQUIPMENT: Workers will be provided without charge or deposit charge on all tools, supplies and equipment required to perform the duties assigned. BOARD, LODGING OR OTHER FACILITIES: The employer will not provide board, lodging or other facilities. ON-THE-JOB-TRAINING: The employer will not provide on-the-job-training. Interested applicants can apply in person during working hours Monday to Friday from 9:00AM to 3:00PM or can contact our office (670)234-3358 email:pikasso.saipan@gmail.com |